header.jpg

  • 12/22/2017
    Open for Abstract Submission
  • 03/01/2018
    Close for Abstract Submission
  • 04/03/2018
    Answer for Abstract Submissions
  • 04/29/2018
    End of Early Registration
  • 06/08/2018
    End of Regular Registration
  • 07/05/2018
    Late Registration

Planning

Sunday, July 1, 2018

Time Event  

Monday, July 2, 2018

Time Event  
09:00 - 09:45 Opening Speech (Music Hall)  
09:45 - 10:30 Interplay of crystal structure, chemical bonding and thermoelectric behavior (Music Hall) - Yuri Grin  
10:30 - 11:15 A 50 Year-Long Breakthrough in the Making: Radioisotope Thermoelectric Generators with New Materials (Music Hall) - Jean-Pierre Fleurial  
11:15 - 12:00 Utilization of Magnetism and Other Novel Principles for Thermoelectric Enhancement and Recent Activities in Asia (Music Hall) - Takao Mori  
14:00 - 16:00 Zintl Phases (Amphitheater Caliste)  
14:00 - 14:30 › Crystal Chemistry of New (and some old) Zintl Phases - Svilen Bobev, University of Delaware  
14:30 - 14:45 › Zintl ions within framework channels: the complex structure and low-temperature transport properties of Na4Ge13 - Stefan Stefanoski, Benedictine University  
14:45 - 15:00 › Experimental Investigation of Thermoelectric Properties of KSb2-xSnx - Hyungyu Jin, Pohang University of Science and Technology (POSTECH)  
15:00 - 15:15 › The A14MPn11: good thermoelectric materials with low valley degeneracy. - Geoffroy Hautier, Institute of Condensed Matter and Nanosciences (IMCN), Universite´ Catholique de Louvain  
15:15 - 15:30 › Thermoelectric properties of a new Zintl phase NaZn4As3 with ultralow thermal conductivity - aichi yamashita, Graduate School of Pure and Applied Sciences, University of Tsukuba, WPI-MANA, National Institute for Materials Science (NIMS), National Institute of Advanced Industrial Science and Technology  
15:30 - 16:00 › Thermoelectric Behavior of Silver-Cluster Phosphides: Origin and Optimization - Juergen Nuss, Max Planck Institute for Solid State Research  
14:00 - 16:00 Applications (Atelier 1)  
14:00 - 14:15 › Measurement and analysis of thermal conductivity, thermal diffusivity and interfacial thermal resistance of thermoelectric thin films - Takahiro Baba, PicoTherm Corporation  
14:15 - 14:30 › Heat pipes thermal performance for a reversible thermoelectric cooler-heat pump system - Patricia Aranguren, Smart Citites Institute, Public University of Navarre  
14:30 - 15:00 › Development of integrated micro-thermoelectric sensors for IC applications - Guillaume Savelli, Univ. Grenoble Alpes, CEA-Liten  
15:00 - 15:15 › New prototype of a thermoelectric heat pump with heat pipes for the air condition of a Nearly Zero Energy Building - Sergio Diaz de Garayo, CENER  
15:15 - 15:30 › Small size thermoelectric power supply for battery backup - Hossein Abedi, CNR-Institute of Condensed Matter Chemistry and Technologies for Energy  
15:30 - 15:45 › Benefits of integrating vehicular thermoelectric generators with exhaust heat recovery apparatus - Byung-Wook Kim, Corporate R&D Division for Hyundai Motor Company & Kia Motors Corporation  
15:30 - 15:45 › On the progress in some actual trends in application of thermoelectricity in the Institute of Thermoelectricity (Ukraine) - Valentyn Lysko, Institute of Thermoelectricity NAS and MES of Ukraine  
14:00 - 16:00 Chalcogenides (S, Se, Te) (Atelier 4 & 5)  
14:00 - 14:15 › Electronic structure of Sn1-xInxTe containing defects from KKR-CPA calculations - J Tobola, AGH University of Science and Technology, Faculty of Physics and Applied Computer Science  
14:15 - 14:30 › Modeling Dopability in Diamond-like Semiconductors Using Machine Learning for High-throughput Predictions - Samuel Miller, Northwestern University [Evanston]  
14:30 - 14:45 › Negative Thermal Expansion of GeTe near the Ferroelectric Phase Transition from First Principles - Djordje Dangic, University College Cork, Tyndall National Institute [Cork]  
14:45 - 15:00 › Engineering thermal conductivity through microstructural lattice softening - Riley Hanus, Department of Materials Science and Engineering  
15:00 - 15:30 › Acoustically mismatched nanoinclusions - Raphael Hermann, Oak Ridge National Laboratory - MSTD  
15:30 - 15:45 › Phonon dispersion and scattering considerations for thermoelectrics - Yanzhong Pei, School of Materials Science and Engineering, Tongji Univ.  
15:45 - 16:00 › Rattling dynamics under a planar coordination in tetrahedrites - Chul-Ho Lee, National Institute of Advanced Industrial Science and Technology (AIST)  
16:00 - 16:30 Coffee break  
16:30 - 18:00 Modules Development and Technology (Amphitheater Caliste)  
16:30 - 16:45 › Concept of a Thermoelectric Module and Generator for Automotive Applications Based on an Integrated Functional Design - Lars Heber, Institute of Vehicle Concepts  
16:45 - 17:00 › Demonstrated High-Performance, High-Power Skutterudite Thermoelectric Modules for Space and Terrestrial Applications - Terry Hendricks, Jet Propulsion Laboratory  
17:00 - 17:15 › Development of High Efficiency Segmented Thermoelectric Couples for Space Applications - Fivos Drymiotis, NASA Jet Propulsion Laboratory (JPL)  
17:15 - 17:30 › Silicides thermoelectric modules : performances and challenges - krunoslav romanjek, Université de Grenoble-Alpes  
17:30 - 17:45 › Economic profitability of hybrid photovoltaic-thermoelectric solar harvesters - Dario Narducci, Dept. of Materials Science, University of Milano Bicocca  
17:45 - 18:00 › EFFICIENCY OF AN AUTOMATED DISSIPATION SYSTEM APPLIED TO Bi2Te3 AND MULTI STAGE MODULES - Fabio Puglia, ISC - Balistic  
16:30 - 18:00 Modelling (Atelier 1)  
16:30 - 17:00 › On the Search of Novel Compounds Featuring Thermoelectric Properties. Some Suggestions Based on Theoretical Considerations - JEAN-FRANCOIS HALET, Institut des Sciences Chimiques de Rennes  
17:00 - 17:15 › Minimum thermal conductivity in the context of diffuson-mediated thermal transport - Matthias Agne, Northwestern University [Evanston]  
17:15 - 17:30 › Effects of Grain Size and Grain Boundary Nanostructures on Lattice Thermal Conductivity of MgO - Susumu Fujii, Department of Adaptive Machine Systems, Osaka University  
17:30 - 17:45 › Investigation of phonon states in a poor thermal crystalline conductor by means of inelastic scattering spectroscopy - Stéphane Pailhès, Institut Lumière Matière [Villeurbanne]  
17:45 - 18:00 › Three-dimensional finite-element simulation of a flexible µ-TEG based on bismuth telluride - soufiane eloualid, Institut Jean Lamour  
16:30 - 18:00 Chalcogenides (S, Se, Te) (Atelier 4 & 5)  
16:30 - 16:45 › Improved Thermoelectric Performance in Non-stoichiometric Cu2+δMn1-δSnSe4 Quaternary Diamond-like Compounds - Qingfeng Song, Shanghai Institute of Ceramics, Chinese Academy of Science, University of Chinese Academy of Sciences  
16:45 - 17:00 › Rhombohedral to Cubic Conversion of GeTe via MnTe alloying Leads to Ultralow Thermal Conductivity, Electronic Band Convergence and High Thermoelectric Performance - Zheng Zheng, Wuhan University of Technology  
17:00 - 17:15 › Thermoelectric features of the Cu7P(Se1-xSx)6 with high copper ionic mobility - Michal Piasecki, Institute of Physics J.Dlugosz University  
17:15 - 17:30 › Compatibility investigation between cobalt metallized tellurides-based Thermoelectric legs and an Ag–Cu–In-based brazing alloy - Dana Ben-Ayoun, Department of Materials Engineering, Ben-Gurion University of the Negev, Beer Sheva 84105  
17:30 - 17:45 › Native Defects in SnSe and their Temperature Dependence - Katerina Sraitrova, University of Pardubice, Faculty of Chemical Technology  
17:45 - 18:00 › Harnessing thermoelectric effects in vertical phase change memory cells - Jyotsna Bahl, Center for Research in Nano Technology and Sciences (CRNTS), IIT Bombay  

Tuesday, July 3, 2018

Time Event  
08:30 - 10:30 Zintl Phases (Amphitheater Caliste)  
08:45 - 09:15 › Phase boundary mapping for the discovery and optimization of thermoelectric materials - G. Jeffrey Snyder, Northwestern University [Evanston]  
09:15 - 09:30 › Enhancement of average ZT of n-type Mg3(Sb,Bi)2 by increasing grain size - Hiromasa Tamaki, Panasonic Corporation  
09:30 - 09:45 › Probing the Thermal Stability Te-doped Mg3Sb1.5Bi0.5 via Combined Total Scattering and Powder Diffraction - Lasse Rabøl Jørgensen, Center for Materials Crystallography, Department of Chemistry, Aarhus University  
09:45 - 10:00 › Observation of Valence band crossing: The Thermoelectric Properties of the CaZn2Sb2-CaMg2Sb2 Solid Solution - Max Wood, Northwestern University [Evanston]  
10:00 - 10:30 › Chemical bonding in layered thermoelectric materials - Bo Iversen, Center for Materials Crystallography, Department of Chemistry, Aarhus University  
08:30 - 10:30 Chalcogenides (S, Se, Te) (Atelier 1)  
08:30 - 08:45 › Donor-type doping in BiCuSeO: from high ZT values in p-type materials towards p-to-n type switching - David Berardan, Univ. Paris-Sud  
08:45 - 09:00 › Thermoelectric properties of oxysulfide Bi1-xPbxCuOS compounds - Jean-Baptiste Labégorre, Laboratoire de cristallographie et sciences des matériaux  
09:00 - 09:15 › Data-driven Discovery of Cu-S based Thermoelectric Materials - Ruizhi Zhang, School of Engeneering and Material Science, Queen Mary University of London  
09:15 - 09:45 › Interplay between the structural and thermoelectric properties in Cu-S based synthetic minerals - Koichiro Suekuni, Department of Applied Science for Electronics and Materials, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University  
09:45 - 10:00 › A structural and thermoelectric study of a Cu-rich sulfide family: the germanite Cu26-xFe4+xGe4S32 - Laura Paradis-Fortin, Laboratoire de cristallographie et sciences des matériaux, Institut des Sciences Chimiques de Rennes  
10:00 - 10:15 › High-performance thermoelectric bulk colusite by process controlled structural disordering - Cédric Bourgès, Department of Applied Physics, Graduate School of Engineering, Tohoku University  
10:15 - 10:30 › Effect of composition on thermoelectric properties of as-cast materials: the Cu12-xCoxSb4S13-ySey case - Antonio PEREIRA GONCALVES, C²TN  
08:30 - 10:30 Modules Development and Technology (Atelier 4 & 5)  
08:30 - 08:45 › µTEGs for Self-Powered Sensor Nodes: Device Optimization and System Integration - Jane Cornett, Analog Devices  
08:45 - 09:00 › Human body-heat energy harvesters based on transverse thermoelectric effects - Je-Hyeong Bahk, EECS Dept, University of Cincinnati  
09:00 - 09:15 › Characterization of micro thermoelectric coolers with high packing density - Heiko Reith, Leibniz Institute for Solid State and Materials Research - IFW Dresden (Dresden, Germany)  
09:15 - 09:30 › Thermoelectric nanogenerator array : a viable source of power for the autonomy of wireless sensors networks ? - dimitri tainoff, Institut Néel  
09:30 - 09:45 › A High Efficient Thermoelectric Module with Heat Storage utilizing Sensible Heat for IoT Power Supply - Kanae Nakagawa, FUJITSU LABORATORIES LTD. - Takashi Suzuki, FUJITSU LABORATORIES LTD.  
09:45 - 10:00 › Fabrication and characterization of thermoelectric generators based on silicon nanowire forests - Giovanni Pennelli, Dipartimento di Ingegneria dellÍnformazione, University of Pisa  
10:00 - 10:15 › Development of high durability substrate for thermoelectric module - koya arai, Central Research institute, Mitsubichi materials corporation  
10:15 - 10:30 › Experimental evidence for separation of thermally generated bipolar charge carriers within a p-i-n-junction - Franziska Maculewicz, University of Duisburg-Essen, Institute of Technology for Nanostructurs & CENIDE  
10:30 - 11:00 Coffee break  
11:00 - 12:30 Applications (Amphitheater Caliste)  
11:00 - 11:15 › Very long lifetime terrestrial RTG with Americium heat power source - Joel Dufourcq, HotBlock OnBoard  
11:15 - 11:30 › Modeling and Simulation of a Thermoelectric Generator Using Bismuth Telluride for Waste Heat Recovery in Automotive Diesel Engine - Ali Nour Eddine, École Centrale de Nantes  
11:30 - 11:45 › RTGs: the enduring and the future - David Woerner, Jet Propulsion Laboratory  
11:45 - 12:00 › Power Enhancement of Si Membrane-based Thermoelectric Generator by Aluminium Ultrathin Layer Deposition - Ryoto Yanagisawa, IIS, The University of Tokyo  
12:00 - 12:15 › Holistic Optimization of Thermoelectric Generators for Automotive Applications Reaching a Cost Benefit Ratio of 81 €/g/km - Martin Kober, Deutsches Zentrum für Luft- und Raumfahrt [Stuttgart]  
12:15 - 12:30 › A versatile system for Hall effect measurements at high temperature - murat gunes, Univ Paris Sud, Univ Paris Saclay  
11:00 - 12:30 Chalcogenides (S, Se, Te) (Atelier 1)  
11:00 - 11:15 › Pulsed Hybrid Reactive Magnetron Sputtering as a new technique to obtain high quality selenides - Marisol Martín-González, Marisol Martin-Gonzalez  
11:15 - 11:30 › Improved electrical transport properties and optimized thermoelectric figure of merit in lithium-doped copper sulfides - Mengjia Guan, Shanghai Institute of Ceramics, Chinese Academy of Science  
11:30 - 11:45 › Suppressing Intervalley scattering for p-type InTe by nanoprecipitates - Xu Lu, Chongqing University  
11:45 - 12:00 › Unconventional Heat Transport Induced by Phase Transition in Cu2-xSe - Dimitri Vasilevskiy, Ecole Polytechnique de Montreal, TEMTE Inc  
12:00 - 12:30 › Intrinsically low thermal conductivity in metal chalcogenides for high performance thermoelectric energy conversion - Kanishka Biswas, Jawaharlal Nehru Centre for Advanced Scientific Research (JNCASR),  
11:00 - 12:30 Other Materials (Atelier 4 & 5)  
11:00 - 11:15 › Electron-poor Al-Ge narrow gap semiconductors: comparison with thermoelectric Zn-Sb compounds - Mickaël Beaudhuin, Institut Charles Gerhardt Montpellier - Institut de Chimie Moléculaire et des Matériaux de Montpellier  
11:15 - 11:30 › Structural analysis of beta- and gamma-phases of Zn4Sb3 thermoelectrics - Kei Hayashi, Department of Applied Physics, Graduate School of Engineering, Tohoku University  
11:30 - 11:45 › Kondo-like phonon scattering in thermoelectric clathrates - Silke Paschen, Institute of Solid State Physics, Vienna University of Technology  
11:45 - 12:00 › Looking for stable thermoelectric materials - Karl Frederik Færch Fischer, Department of Chemistry, Aarhus University  
12:00 - 12:15 › Thermoelectric Properties and Search for condition of insulator transition in Al-Ir based quasicrystalline approximants - Yutaka Iwasaki, Department of Advanced Materials Science,The University of Tokyo  
12:15 - 12:30 › Suppression of vacancies boosts thermoelectric performance in type-I clathrates - Xinlin Yan, Institute of Solid State Physics, Vienna University of Technology  
12:30 - 14:00 Lunch  
14:00 - 16:00 Other Materials (Amphitheater Caliste)  
14:00 - 14:30 › Understanding and tuning full-Heusler thermoelectric materials based on Fe2VAl - Ernst Bauer, Christian Doppler Laboratory for Thermoelectricity, Institute of Solid State Physics, Technische Universität Wien  
14:30 - 14:45 › Thermoelectric properties of p- and n-type doped ScNiSb - Donald Morelli, Michigan State University [East Lansing]  
14:45 - 15:00 › Facile Synthesis of FeNbSb based Half-Heusler Thermoelectric Materials - Nader Farahi, German Aerospace Center (DLR)  
15:00 - 15:15 › Phonon scattering by antiphase boundaries in Fe2VAl - Eric Alleno, Institut de Chimie et des Matériaux Paris Est  
15:15 - 15:30 › Industrialized Half-Heusler material and thermoelectric modules therefrom - Daniel Zuckermann, Daniel Zuckermann  
15:30 - 15:45 › High-Entropy Half-Heusler Thermoelectrics with High ZT~1.5 - Peter Franz Rogl, Institute of Materials Chemistry, University of Vienna  
15:45 - 16:00 › Half-Heuslers, a compound not as stable as one stipulate. - Robin Lefèvre, Interdisciplinary Nanoscience Center (iNANO)  
14:00 - 16:00 Silicides (Atelier 1)  
14:00 - 14:15 › Rapid oxidation in Mg2(Si-Sn) alloys ; optimization via tin reduction and nanostructuring approach - Christelle Navone, Univ. Grenoble Alpes, CEA-LITEN  
14:15 - 14:30 › Exploit Si-kerf from Photovoltaics: A Promising Application on the Thermoelectrics - Theodora Kyratsi, University of Cyprus  
14:30 - 14:45 › Insight on band structure of p-type Mg2Si1-xSnx with x=0-1 using a single parabolic band - Hasbuna Kamila, German Aerospace Center (DLR)  
14:45 - 15:00 › Contact development for n and p-type Mg2(Si,Sn) - Johannes de Boor, German Aerospace Center (DLR)  
15:00 - 15:30 › Recent Progress in Silicide-based Thermoelectric Materials - Yuzuru Miyazaki, Department of Applied Physics, Graduate School of Engineering, Tohoku University  
15:30 - 16:00 › Mg2Si1-xSnx solid solutions: phase formation and challenges in their electrical contacting - Vincente Pacheco, Fraunhofer Institute for Manufacturing Technology and Advanced Materials, IFAM  
14:00 - 16:00 Chalcogenides (S, Se, Te) (Atelier 4 & 5)  
14:00 - 14:15 › Thermoelectric Performance of Bi2Te3 by Acceptor Type Germanium Doping - Niraj Singh, School of Basic Sciences, Indian Institute of Technology Mandi,  
14:15 - 14:30 › Increasing of Z factor for Bi2Te3-Sb2Te3 - Zinovi Dashevsky, Skipidarov S.  
14:30 - 15:00 › Nano-SiC-dispersed Thermoelectric Composites - Jing-Feng Li, State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University  
15:00 - 15:15 › Two-Dimensional Nanostructuring for Enhanced Thermoelectric Performance of Bismuth Telluride Selenide Alloys - Christoph Bauer, Technische Universität Dresden, Physical Chemistry  
15:15 - 15:30 › Effects of defects induced by pressure and temperature on thermoelectric CuGaTe2 chalcopyrite structure materials - Yosuke Fujii, Osaka Prefecture University  
15:30 - 15:45 › Transition metals in ternary rocksalt-type tellurides – doping vs. precipitates - Oliver Oeckler, Leipzig University, Faculty of Chemistry and Mineralogy, IMKM  
15:45 - 16:00 › Chalcogenide-based nanocomposites for thermoelectric applications - valentina giordano, Institut Lumière Matière [Villeurbanne]  
16:00 - 16:30 Coffee break  
16:30 - 18:30 New Materials and New Materials Discovery (Amphitheater Caliste)  
16:30 - 17:00 › Composite Structures in Thermoelectric Materials - Holger Kleinke, University of Waterloo  
17:00 - 17:15 › High ZT in MnTe via spin physics - Joseph Heremans, The Ohio State University  
17:15 - 17:30 › Dopant Induced Impurity Bands and Carrier Concentration Control for Thermoelectric Enhancement in p‑Type Cr2Ge2Te6 - Guoyu Wang, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences  
17:30 - 17:45 › Large Nernst power factor in polycrystalline topological semimetal NbP - Chenguang Fu, Max Planck Institute for Chemical Physics of Solids  
17:45 - 18:00 › Development of high-performance thermoelectric materials guided by large-scale experimental data - Takushi Kodani, National Institute for Materials Science, The University of Tokyo  
18:00 - 18:15 › Experimental force multipliers for accelerating thermoelectric material discovery - Eric Toberer, Colorado School of Mines [Golden], National Renewable Energy Laboratory  
18:15 - 18:30 › A Valence Balanced Rule for Discovery of New Dimensions of Defective Half-Heuslers - Shashwat Anand, Northwestern University [Evanston]  
16:30 - 18:30 Modelling (Atelier 1)  
16:30 - 16:45 › Molecular dynamics simulations to understand phonon transport in nanoporous materials - Laura de Sousa Oliveira, University of Warwick [Coventry]  
16:45 - 17:00 › Thermoelectric properties of TiNiSn and ZrNiSn half-Heusler alloys through ab-initio calculation and experiments - Lorenzo Maschio, Università degli Studi di Torino  
17:00 - 17:30 › Defects and their influence on the thermoelectric properties of materials: an ab initio study - Philippe Jund, Institut Charles Gerhardt- Institut de Chimie de la Matière Condensée et des Matériaux  
17:30 - 17:45 › Quantum transport simulations of thermoelectric power factor in materials with hierarchical nanostructuring - Vassilios Vargiamidis, School of Engineering, University of Warwick - Samuel Foster, School of Engineering, University of Warwick - Neophytos Neophytou, School of Engineering, University of Warwick  
17:45 - 18:00 › Defect-induced simultaneous increase of the conductivity and Seebeck coefficient in p-doped polycrystalline materials and enhanced thermoelectric power factor - Xanthippi Zianni, Dept. of Aircraft Technology, Technological Educational Institution of Sterea Ellada  
18:00 - 18:15 › Metamaterials for Harnessing Thermoelectric Flow - Woods Lilia, University of South Florida  
18:15 - 18:30 › Detailed Transient Multiphysics Model for Fast and Accurate Design, Simulation and Optimization of a Thermoelectric Generator (TEG) or Thermal Energy Harvesting Device - Alfred Piggott, Applied Thermoelectric Solutions LLC  
16:30 - 18:15 Zintl Phases (Atelier 4 & 5)  
16:30 - 16:45 › Computational Investigation of n-type Doping of Layered Antimonides: Mg3Sb2 and KSnSb - Prashun Gorai, Colorado School of Mines [Golden], National Renewable Energy Laboratory  
16:45 - 17:00 › New Insight on Tuning Electrical Transport Properties via Chalcogen Doping in n-type Mg3Sb2-Based Thermoelectric Materials - Jiawei Zhang, Center for Materials Crystallography, Department of Chemistry, Aarhus University  
17:00 - 17:15 › HRPD and HREM study of p- and n-type semiconductor YxAlyB14 - Tsuyoshi Kajitani, Institute of Multidisciplinary Research for Advanced Materials (IMRAM) Tohoku University  
17:15 - 17:30 › First principles study on the thermoelectric properties of 122 Zintl phase compounds - Hidetomo Usui, Department of Physics, Osaka University  
17:30 - 17:45 › Band engineering of the Mg3Sb2-Mg3Bi2 alloy composition investigated with transport analysis - Kazuki IMASATO, Northwestern University [Evanston]  
17:45 - 18:00 › High thermoelectric properties of As-based 122-Zintl compounds Ba1-xKxCd2As2 - Haruno Kunioka, Tokyo University of Science, National Institute of Advanced Industrial Science and Technology  

Wednesday, July 4, 2018

Time Event  
08:30 - 10:30 Chalcogenides (S, Se, Te) (Amphitheater Caliste)  
08:30 - 08:45 › Mechanochemistry for Thermoelectrics: Nanobulk Mawsonite Cu6Fe2SnS8 Synthesized in an Industrial Mill - Peter Baláž, Institute of Geotechnics  
08:45 - 09:00 › Copper rich complex Sulfides for Thermoelectric applications - PavanKumar Ventrapati, Laboratoire de cristallographie et sciences des matériaux  
09:00 - 09:15 › Low-temperature structure of tetrahedrite - Paz Vaqueiro, University of Reading  
09:15 - 09:30 › Nanoparticle-dispersed Cu12Sb4S13-based thermoelectric composites - Fu-Hua Sun, State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University  
09:30 - 10:00 › Mineral-Related Sulphides and Selenides for Thermoelectric Energy Harvesting - Anthony Powell, University of Reading  
10:00 - 10:15 › Thermoelectric Performance of Tetrahedrite Synthesized by a Solution-Phase Method - Daniel Weller, Michigan State University [East Lansing]  
10:15 - 10:30 › Structural phase transitions at high temperature of thermoelectric copper-based sulfides studied by in situ techniques - Pierric Lemoine, Institut des Sciences Chimiques de Rennes  
08:30 - 10:30 New Materials and New Materials Discovery (Atelier 1)  
08:30 - 09:00 › Structure and bonding, and their role in thermal transport of materials for thermoelectrics applications: It's not just about skutterudites and clathrates anymore! - George Nolas, University of South Florida  
09:00 - 09:15 › Shock-compression as a novel method of preparation of nanostructured CoSb3 skutterudite - Krzysztof Wojciechowski, AGH University of Science and Technology, The Institute of Advaced Manufacturing Technology  
09:15 - 09:30 › High-pressure synthesis of tetragonal iron aluminide FeAl2 - Kazuki Tobita, Department of Advanced Materials Science,The University of Tokyo  
09:30 - 09:45 › Optimization of Thermoelectric Transport Properties on Weak Topological Insulator Bi14Rh3I9 - Ping Wei, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology  
09:45 - 10:00 › Metal Phosphides as Overlooked Thermoelectric Materials - Umut Aydemir, Department of Chemistry, Koc University  
10:00 - 10:15 › A web application "Starrydata" for collecting and sharing plot data on published papers - Masaya Kumagai, SAKURA Internet Inc., RIKEN Center for Advanced Intelligence Project  
10:15 - 10:30 › Phonons across the superionic transition in CuCrSe2 and AgCrSe2 - Olivier Delaire, Associate Professor, Department of Mechanical Engineering and Materials Science  
08:30 - 10:30 Modelling (Atelier 4 & 5)  
08:45 - 09:00 › Direct Current Polarity-Reversal Technique to Measure the Thomson Coefficient to Determine the Absolute Seebeck Coefficient - Yasutaka Amagai, National institute of advanced industrial Technology(AIST), National Metrology Institute of Japan (NMIJ)  
09:00 - 09:30 › The Effective Mass: Our Stranger Friend - Marco Fornari, Central Michigan University  
09:30 - 09:45 › A Study on the Reliability of Thermoelectric Couple Networks - Christopher Matthes, NASA Jet Propulsion Laboratory, California Institute of Technology  
09:45 - 10:00 › Phonon transport across a Si/Ge interface: the role of inelastic scattering - Jesse Maassen, Dalhousie University [Halifax]  
10:00 - 10:15 › The importance of considering parasitic heat losses in modelling TEG performance for high temperature application - Roy Schwurack, Technische Universität Dresden  
10:15 - 10:30 › Theoretical study on thermoelectric properties of metal/semiconductor multilayer with weak electron-phonon coupling - Shin Yabuuchi, Hitachi, Ltd.  
10:30 - 11:00 Coffee break  
11:00 - 12:30 Chalcogenides (S, Se, Te) (Amphitheater Caliste)  
11:00 - 11:15 › Improving the thermoelectric efficiency of La3-xTe4 via f-orbital chemistry - Sabah Bux, Jet Propulsion Laboratory  
11:15 - 11:30 › Phase boundary mapping and phase discovery in a quaternary system: carrier density control in Cu2HgGeTe4 - Brenden Ortiz, Colorado School of Mines [Golden]  
11:30 - 12:00 › Considerations for enhancement of the thermoelectric potential of semiconductors - Yaniv Gelbstein, Ben Gurion University  
12:00 - 12:15 › Promising thermoelectric performances of Cu-excess a-Cu2+xSe for near-room-temperature applications - Jang-Yeul Tak, Energy and Environmental Division, Korea Institute of Ceramic Engineering and Technology, School of advanced materials science & engineering, Sungkyunkwan University  
12:15 - 12:30 › Anomalous transport phenomena and thermoelectric performance enhancement in the Cu-overstuffed ferromagnetic spinel Cu1+xCu2Te4 - Jean-Baptiste Vaney, National Institute for Materials Science (NIMS), MANA  
11:00 - 12:30 Modules Development and Technology (Atelier 1)  
11:00 - 11:15 › Reliability Evaluation System for the Thermoelectric Power Generation Module Simulating Thermal Cycle - Joon Heo, BlueSys Co., Ltd.  
11:15 - 11:30 › A New Model for Characterising Thermoelectric Modules by Impedance Spectroscopy and its Application in Qualification and Assessing In-service Degradation  
11:30 - 11:45 › Design of Thermal Contacts for High Performances Heusler-Based Thermoelectric Modules - Geoffrey Roy, Université catholique de Louvain, Institute of Mechanics, Materials and Civil Engineering, Materials and process Engineering, IMAP  
11:45 - 12:00 › Effect of electrical contact resistance on the performance of cascade thermoelectric coolers - Volodymyr Semeniuk, Thermion Company  
12:00 - 12:15 › Non-linear impedance spectroscopy: beyond the ZT estimation - etiennne thiebaut, Centre de Nanosciences et de Nanotechnologies [Orsay]  
12:15 - 12:30 › Detachable Contacts for Simultaneous Thermoelectric Characterization - Antoine Micallef, German Aerospace Center (DLR)  
11:00 - 12:30 Oxides (Atelier 4 & 5)  
11:00 - 11:30 › Exploiting Interfaces to Enhance the Performance of Oxide Thermoelectrics - Robert Freer, University of Manchester [Manchester]  
11:30 - 11:45 › Redox-promoted enhancement of thermoelectric performance in strontium titanate-based materials - Andrei Kovalevsky, CICECO – Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro  
11:45 - 12:00 › Challenges to enhance the thermoelectric properties of ZnO-based ceramics - Slavko Bernik, Jozef Stefan Institute [Ljubljana, Slovenia]  
12:00 - 12:15 › Thermoelectric properties of doubly substituted La0.95Sr0.05Co1-xCrxO3 (0 ≤ x ≤ 0.5) ceramics - Cong Chen, Bundesanstalt für Materialforschung und -prüfung, Université de Tours  
12:15 - 12:30 › Defect and Schottky Barrier Engineering in Thermoelectric SrTiO3-δ Ceramics - Soonil Lee, School of Materials Science and Engineering  
12:30 - 14:00 Lunch  
14:00 - 16:30 Silicides (Amphitheater Caliste)  
14:00 - 14:30 › Silicon and metal silicides nanocomposites as high-performance thermoelectric materials - Ken Kurosaki, Graduate School of Engineering, Osaka University, Research Institute of Nuclear Engineering, University of Fukui, JST, PRESTO  
14:30 - 14:45 › Thermoelectric and galvanomagnetic properties of topologically non-trivial (Co-M)Si “new fermion” semimetals (M=Fe, Ni) - Alexander Burkov, Ioffe Institute  
14:45 - 15:00 › Screening silicide thermoelectric materials using ab initio transport calculations - Ole Martin Løvvik, SINTEF, University of Oslo  
15:00 - 15:15 › Demonstration of thermoelectric generation in the metallurgic industry - Maarten den Heijer, RGS Development B.V.  
15:15 - 15:30 › A thermal-shock resistant, high performance, SiGe thermoelectric generator for industrial waste heat applications - Axel Schönecker, RGS Development B.V.  
15:30 - 15:45 › Thermoelectric performance in nanocomposite bulk consisting of MnSi1.7 and SiGe - Yosuke Kurosaki, Hitachi, Ltd.  
15:45 - 16:00 › Effect of element substitution on the phase stability of complex MnSiγ - Swapnil Ghodke, Toyota Technological Institute  
16:00 - 16:15 › High temperature oxidation of higher manganese silicides and alloys - Antoine de Padoue SHYIKIRA, University of Agder - Gunstein Skomedal, ELKEM, University of Agder - Peter Middleton, University of Agder - Tor Sætre, University of Agder  
16:15 - 16:30 › Mechanical Properties and Failure Analysis of Higher Manganese Silicide - Yu-Chih Tseng, Canmet Materials - Salman Razavi-Tousi, Canmet Materials  
14:00 - 16:30 Process (Atelier 4 & 5)  
14:00 - 14:15 › Porous thermoelectric materials and their applications - Teruyuki Ikeda, Ibaraki University  
14:15 - 14:30 › Fabrication of filled skutterudites with high thermoelectric performance using scanning laser melting method - shengqiang bai, Shanghai Institute of Ceramics, Chinese Academy of Sciences  
14:30 - 14:45 › Contact layer development on bismuth Telluride thermoelectric materials using novel light sintering technique - Giri Joshi, Nanohmics, Inc.  
14:45 - 15:00 › Near-net-shape fabrication of thermoelectric element by flash sintering - Masashi Mikami, National Institute of Advanced Industrial Science and Technology  
15:00 - 15:15 › Laser sintering of thermoelectric compounds - Yoshiaki Kinemuchi, National Institute of Advanced Industrial Science and Technology (AIST)  
15:15 - 15:30 › Enhancing transport properties of Bi2Te3-xSex alloys via doping for thermoelectric power generation applications - Omer Meroz, Ben-Gurion University of the Negev  
15:30 - 15:45 › Advanced Protective Layers for Improved Chemical Stability in CoSb3, Mg2Si and Cu2X Based Thermoelectric Materials - Andrzej Kolezynski, AGH - University of Science and Technology, Faculty of Materials Science & Ceramics  
15:45 - 16:00 › Laser Additive Manufacturing with Bismuth Telluride and Magnesium Silicide - Saniya LeBlanc, The George Washington University  
16:00 - 16:15 › Additive Printing and Photonic Sintering of High-Performance and Flexible Thermoelectric Materials and Devices Using Colloidal Nanocrystals - Yanliang Zhang, University of Notre Dame  
16:15 - 16:30 › On the Study of Electrospinning for Thermoelectric Devices - Ben-Je Lwo, National Defense University  
14:00 - 16:30 Other Materials (Atelier 1)  
14:00 - 14:15 › Thermoelectric characterization of n-type and p-type skutterudites fabricated in a up-scalable way - Olga Caballero-Calero, Instituto de Micro y Nanotecnología  
14:15 - 14:30 › Experimental and Computational Phase Boundary Mapping of Co-Sn-Te Phase Space for Skutterudites - Caitlin Crawford, Colorado School of Mines [Golden]  
14:30 - 14:45 › Analysis and Risk Mitigation of Raw Materials Sourcing and the Implications for eMMRTG Skutterudite Couple Performance - Tim C. Holgate, Teledyne Energy Systems, Inc.  
14:45 - 15:00 › Synergistically enhancement of thermoelectric properties in partially filled CoSb3 skutterudites through simultaneous doping and nanostructuring - Manjusha Battabyal, International Advanced Research Centre for Powder Metallurgy and New Materials  
15:00 - 15:15 › Magnesioreduction : a low temperature synthesis route towards CoSb3-based skutterudites with improved thermoelectric properties - Sylvain Le Tonquesse, Institut des Sciences Chimiques de Rennes  
15:15 - 15:30 › Optimisation Strategies for Double filled InxLa0.25Co4Sb12 (0 ≤ x ≤ 0.5) skutterudite material - Mohd Sabri Mohd Faizul, University of Malaya  
15:30 - 15:45 › Enhanced thermoelectric properties of In0.25Co4Sb12 with InSb nanoinclusions - Ramesh Chandra Mallik, Indian Institute of Science [Bangalore]  
15:45 - 16:00 › A new and fast SPD-method to produce high ZT (>1.3) skutterudites - Gerda Rogl, Christian Doppler Laboratory for Thermoelectricity, University of Vienna  
16:00 - 16:15 › Realization of high figure of merit in Ni compensated double filled p-type skutterudites - Tulashi Dahal, Matrix Industries  
16:15 - 16:30 › Filling Fraction Fluctuation in CoSb3-based Skutterudites Synthesized by High Pressure - Federico Serrano-Sanchez, Instituto de Cienca de Materiales de Madrid [Madrid]  

Thursday, July 5, 2018

Time Event  
08:30 - 10:30 Chalcogenides (S, Se, Te) (Amphitheater Caliste)  
09:00 - 09:15 › Thermoelectric performance of spark plasma-textured n-type polycrystalline SnSe - Peng-Peng Shang, State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, College of Chemistry and Material Science, Shandong Agricultural University  
09:15 - 09:30 › Ultra-high average figure of merit in synergistic band engineered Sn1-xNaxSe0.9S0.1 single crystals - Kunling Peng, Chongqing University  
09:30 - 09:45 › Modification of bulk heterojunction and Cl doping for high thermoelectric performance SnSe2/SnSe nano-composites - Yuejiao Shu, Wuhan University of Technology  
09:45 - 10:00 › Structure and transport properties of nanostructured alloys of the novel thermoelectric material SnSe - Norbert Nemes, Department of Materials Physics, Universidad Complutense de Madrid  
10:00 - 10:15 › Reassessment of thermoelectric potential of SnS - Jiri Hejtmanek, Institute of Physics of the Czech Academy of Sciences - Cestmir Drasar, University of Pardubice, Faculty of Chemical Technology  
10:15 - 10:30 › Effect of resonant dopant In on the thermoelectric properties of Sn1.03Te - Shantanu Misra, Institut Jean Lamour, UMR 7198 CNRS  
08:30 - 10:30 Oxides (Atelier 4 & 5)  
08:45 - 09:00 › Extended Solubility Limit of ZnO on Binary Doping Leading to Anomalously Low Thermal Conductivity - Michitaka Ohtaki, Research and Education Center for Advanced Energy Materials, Devices, and Systems, Kyushu University, Department of Applied Science for Electronics and Materials, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University  
09:00 - 09:15 › Growth and characterization of thin film CaMnO3 and CaMn1-xNbxO3 for thermoelectrics. - Erik Ekström, Thin Film Physics Division, Department of Physics, Chemistry, and Biology, Linköping University  
09:15 - 09:30 › Enhanced electronic conduction and phonon scattering in the Ga2O3(ZnO)m - In2O3(ZnO)m (m=9 and 15) solid solution by designing interfaces at the nanoscale level. - Diana Talia Alvarez Ruiz, University of Manchester [Manchester] - Feridoon Azough, University of Manchester [Manchester] - Demie Kepaptsoglou, SuperSTEM - Robert Freer, University of Manchester [Manchester]  
09:30 - 09:45 › Transferable nanoporous Ca3Co4O9 thin films for flexible thermoelectric applications - Biplab Paul, Thin Film Physics Division, Department of Physics, Chemistry, and Biology (IFM), Linköping University  
09:45 - 10:00 › Synthesis, sintering and thermoelectric properties of Sr1-xLaxCoO3 cubic perovskite ceramics - Fabian Delorme, Université de Tours  
10:00 - 10:15 › Self-assembled oxide 2D nanocomposite with enhanced thermoelectric power factor and reduced thermal conductivity - Armin Feldhoff, Leibniz Unversity Hannover  
10:15 - 10:30 › The Seebeck coefficient in some Ru oxides - Florent Pawula, Laboratoire CRISMAT  
08:30 - 10:30 Other Materials (Atelier 1)  
08:30 - 08:45 › Low-pressure chemical vapour deposition (LPCVD) synthesis of metal-chalcogenide materials for thermoelectric micro-generator applications - Stephen Richards, School of Chemistry  
08:45 - 09:00 › Development of a ZT-Measurement system for thin films plus additional Hall constant determination in a temperature range from LN2 up to 300°C - Hans-W. Marx, Linseis Messgeräte GmbH  
09:00 - 09:15 › Transport measurements of bismuth nanowire embedded in quartz template by nano-fabrication - Yasuhiro Hasegawa, Saitama University  
09:15 - 09:30 › Scalable, large-area and adaptable thermoelectric nanomaterials with high energy conversion efficiencies - Mercè Pacios, Catalonia Institute for Energy Research (IREC)  
09:30 - 09:45 › High-Performance Thermoelectric Properties of Multiwall Carbon Nanotubes Through Chemical Treatments - André Pereira, IFIMUP and IN−Institute of Nanoscience and Nanotechnology, Departamento de Física e Astronomia, Faculdade de Ciências, Universidade do Porto  
09:45 - 10:00 › Integrated Silicon/Silicon Germanium Nanowires Thermo-Electric Generators - Alex Morata, Catalonia Institute for Energy Research (IREC)  
10:00 - 10:15 › Simulation, fabrication and measurements of thermoelectric transport properties of crystalline sub-micron silicon beams - Andrej Stranz, IMB-CNM (CSIC)  
10:15 - 10:30 › Thin film Tin Selenide (SnSe) Thermoelectric Generators Exhibiting Ultra-Low Thermal Conductivity - Matthew Burton, University of Swansea  
10:30 - 11:00 Coffee break  
11:00 - 12:30 Chalcogenides (S, Se, Te) (Amphitheater Caliste)  
11:00 - 11:15 › Enhancement of Thermoelectric Performances in Topological Crystal Insulator Pb0.7Sn0.3Se via Weak Perturbation of the Topological State and Chemical Potential Tuning by Chlorine Doping - Jong-Soo Rhyee, Kyung Hee University  
11:15 - 11:30 › Self-compensating defects in AgSbTe2 from first principles studies - Wojciech Szczypka, AGH University of Science and Technology  
11:30 - 12:00 › Quantum materials for thermoelectricity - Kornelius Nielsch, Leibniz Institute for Solid State and Materials Research - IFW Dresden (Dresden, Germany), TU Dresden, Institute of Materials Science & Institute of Applied Physics  
12:00 - 12:15 › Telluride based Thermoelectrics – from Glasses to Polycrystalline Materials - Bhuvanesh Srinivasan, Institut des Sciences Chimiques de Rennes  
12:15 - 12:30 › Effect of microstructure on the thermoelectric properties of bulk Ag16.7Sb30Te53.3 mosaic crystals. - lamya abdellaoui, Siyuan Zhang, Stefan Zaefferer, Stefan Jakobs, Oana Cojocaru-Mirédin, Yaron Amouyal, Dierk Raabe, Christina Scheu  
11:00 - 12:30 Applications (Atelier 4 & 5)  
11:00 - 11:15 › Key Issues in Developing Viable PV/TE Hybrid Systems - Gao Min, Cardiff University - ANDREW KNOX, University of Glasgow  
11:15 - 11:30 › Harvesting Waste Heat from Cement Kiln by Thermoelectric System - Alireza Rezaniakolaei, Department of Energy Technology, Aalborg University  
11:30 - 11:45 › Zonal thermoelectric passenger cooling: Simulation and Experiment  
11:45 - 12:00 › A Study on Forest Soil Thermoelectric Energy Harvesting Method - Ga Latai, School of Technology  
12:00 - 12:15 › COMPARATIVE ANALYSIS OF DIFFERENT COOLING SYSTEMS FOR GEOTHERMAL THERMOELECTRIC GENERATORS - Leyre Catalan, Public University of Navarre, Smart Cities Institute  
12:15 - 12:30 › Prototypical thermoelectric generator TEG for waste heat conversion from biogas-fired burner - Rafał Zybała, ITME Institute of Electronic Materials Technology, University Research Center "Functional Materials", Warsaw University of Technology  
11:00 - 12:30 Modelling (Atelier 1)  
11:00 - 11:30 › Thermopower of thermoelectric materials with resonant levels - beyond the constant scattering time approximation - Bartlomiej Wiendlocha, Faculty of Physics and Applied Computer Science, AGH University of Science and Technology  
11:30 - 11:45 › Anharmonic and highly anisotropic low energy vibrational guest modes in the type IX chiral cubic barium-silicon clathrate - Romain Viennois, Institut Charles Gerhardt Montpellier - Institut de Chimie Moléculaire et des Matériaux de Montpellier  
11:45 - 12:00 › Experimental validation of a 3D transient model of a Thermoelectric Generator - Jesus Ernesto Jimenez Aispuro, Laboratoire des Sciences de l Ingénieur Appliquées à la Mécanique et au génie Electrique, Laboratoire de Thermique, Energétique et Procédés - Daniel Champier, Laboratoire des Sciences de l Ingénieur Appliquées à la Mécanique et au génie Electrique  
12:00 - 12:15 › Angular Anisotropy of Thermoelectric Properties of a Periodic Composite Medium in the Presence of a Magnetic Field - Yakov Strelniker, Department of Physics, Bar-Ilan University  
12:15 - 12:30 › Modeling and analysis of segmented thermoelectric generator performance using effective properties - Heonjoong Lee, Center for Energy Harvesting Materials and Systems (CEHMS), Department of Mechanical Engineering, Virginia Polytechnic Institute and State University  
12:30 - 14:00 Lunch  
14:00 - 15:45 Other Materials (Amphitheater Caliste)  
14:00 - 14:15 › A Critical Assessment of the Impact of Excess Ni on the Thermoelectric Properties of ZrNiSn  
14:15 - 14:30 › Half-Heusler Thermoelectrics: Stable or Unstable? - Wenjie Xie, Institute for Material Science, University Stuttgart  
14:30 - 14:45 › Efficient waste heat recovery in metal-rich TiNiCuySn half-Heusler alloys - Jan-Willem Bos, Heriot-Watt University [Edinburgh]  
14:45 - 15:00 › Low Temperature Magnetotransport Anomalies in Fe-Doped (Ti, Hf, Zr)NiSn Alloys - Trevor Bailey, University of Michigan, Department of Physics  
15:00 - 15:15 › The decreases of the lattice thermal conductivity of the FeV0.955-xHf0.045TixSb half-Heusler phases - Kevin Delime-Codrin, Toyota Technological Institute  
15:15 - 15:30 › Unique role of refractory Ta alloying in enhancing the figure of merit of NbFeSb thermoelectric materials - Junjie Yu, Zhejiang University  
15:30 - 15:45 › Ultra-fast fabrication of bulk ZrNiSn thermoelectric material through self-propagating high-temperature synthesis combined with in-situ quick pressing - Tiezheng Hu, Wuhan University of Technology  
14:00 - 15:45 Applications (Atelier 1)  
14:00 - 14:15 › New Generation of Micro-Flexible Thermoelectric Devices to be Applied in Electronic Printing - Ana Pires, Institute of Physics of Materials of the University of Porto  
14:15 - 14:30 › Complete characterization of bulk thermoelectric elements up to 250 ºC by means of impedance spectroscopy - Jorge García-Cañadas, Universitat Jaume I  
14:30 - 14:45 › Do high efficiency kW pulsed thermoelectric generators exist? - JOHN STOCKHOLM, Marvel Thermoelectrics - James Glick, Applied Circuit Designs  
14:45 - 15:00 › Maximum Power Point Tracking on a TEG operated under constant heat conditions - Marcos Compadre, School of Engineering [Glasgow] (University of Glasgow)  
15:00 - 15:15 › A new thermoelectric generator concept for maximizing waste heat recovery under highly variable thermal load - Francisco Brito, Universidade do Minho, Mech. Eng. Dept.  
15:15 - 15:30 › Preview Certified Reference Material Data, Measurement Protocols, and Uncertainty Analysis for p-Type Polycrystalline Silicon Germanium at High Temperature - Joshua Martin, National Institute of Standards and Technology  
15:30 - 15:45 › Wearable Electrocardiography System Powered by a Flexible Thermoelectric Power Generation Module - Choong Sun Kim, Korea Advanced Institute of Science and Technology  
14:00 - 15:45 Organic and Hybrid Materials (Atelier 4 & 5)  
14:00 - 14:15 › Towards the Fabrication of Flexible and Efficient Organic Thermoelectric Generators by Inkjet Printing Technique - Marco Cassinelli, Italian Institute of Technology  
14:15 - 14:30 › Enhanced Thermoelectric Properties of PEDOT/Te Quantum Dot Composite Films - qin yao, Shanghai Institute of Ceramics, Chinese Academy of Sciences,  
14:30 - 14:45 › Energy filtering effect of PEDOT:PSS/Bi2Te3 nanowire composites - Wan Sik Kim, GIST(Gwangju Institute of Science and Technology)  
14:45 - 15:00 › Module Design for Organic Thermoelectric Materials - Masakazu Mukaida, Nanomaterial Research Institute, National Institute of Advanced Industrial Science and Technology (AIST)  
15:00 - 15:15 › Films of carbonaceous nanofillers and polymers as stable n-type materials for thermoelectric devices - Clara M. Gómez, Institute of Material Science  
15:15 - 15:30 › Interfacial thermal resistance between Bismuth Telluride and PEDOT:PSS - Koji Miyazaki, Kyushu Insitute of Technology  
15:45 - 16:15 Coffee break  
16:15 - 16:55 Young Investigator Award Lecture  
16:55 - 17:35 Outstanding Achievement Award Lecture  
17:35 - 18:00 Closing Remarks  
  
Online user: 1 RSS Feed